Water-based liquid concentrate-primer.
The concentrate allows you to obtain a deep penetration primer on demand, in different densities, depending on the specific task and surface treatment characteristics. It is intended for use for pre-treatment and dedusting of gypsum, cement-based surfaces, putty, porous mineral surfaces (gypsum board, brick, concrete), natural stones, wood, plaster and other surfaces. Ideal for wallpapering, painting, tiling, as well as for strengthening old, partially loosened and flaking putty, paint. It does not contain solvents, which makes it almost odorless, and can be used even in areas intended for food storage. Diluted with water in a ratio of up to 1:10.
Ingredients: Acrylic dispersion, water, preservatives and additives.
Consumption: 1:10 ratio.
Usage: The surface must be dry, clean of dirt and old coatings. It is not allowed to use on frozen bases. Before use, it is necessary to mix the concentrate, then dilute it with clean water in a ratio of 1:5 - 1:10, depending on the nature of the intended work and the characteristics of the surface. For example, when performing works related to hydro and thermal insulation, gluing facing tiles, ceramic granite (including facade), moisture-resistant gypsum board and other relatively more responsible works, it is recommended to dilute the concentrate in a ratio of 1:5 - 1:7. Mix well before use. Apply a thin layer with a brush or roller, excluding accumulations of material. Perform work in a ventilated area.
Drying time: 2-3 hours.
Complete drying: after 24 hours at a temperature of 20±2°C and a relative humidity of 65±5%. At low temperatures and high humidity, the drying time increases.
Coverage: 0.1-0.2l/m²
The concentrate allows you to obtain a deep penetration primer on demand, in different densities, depending on the specific task and surface treatment characteristics. It is intended for use for pre-treatment and dedusting of gypsum, cement-based surfaces, putty, porous mineral surfaces (gypsum board, brick, concrete), natural stones, wood, plaster and other surfaces. Ideal for wallpapering, painting, tiling, as well as for strengthening old, partially loosened and flaking putty, paint. It does not contain solvents, which makes it almost odorless, and can be used even in areas intended for food storage. Diluted with water in a ratio of up to 1:10.
Ingredients: Acrylic dispersion, water, preservatives and additives.
Consumption: 1:10 ratio.
Usage: The surface must be dry, clean of dirt and old coatings. It is not allowed to use on frozen bases. Before use, it is necessary to mix the concentrate, then dilute it with clean water in a ratio of 1:5 - 1:10, depending on the nature of the intended work and the characteristics of the surface. For example, when performing works related to hydro and thermal insulation, gluing facing tiles, ceramic granite (including facade), moisture-resistant gypsum board and other relatively more responsible works, it is recommended to dilute the concentrate in a ratio of 1:5 - 1:7. Mix well before use. Apply a thin layer with a brush or roller, excluding accumulations of material. Perform work in a ventilated area.
Drying time: 2-3 hours.
Complete drying: after 24 hours at a temperature of 20±2°C and a relative humidity of 65±5%. At low temperatures and high humidity, the drying time increases.
Coverage: 0.1-0.2l/m²
