Acrylic-based liquid primer for interior and exterior work.
Designed for pre-treatment and dedusting of gypsum, cement-based surfaces, putty, porous mineral surfaces (gypsum board, brick, concrete), natural stones, wood, plaster and other surfaces. Ideal for wallpapering, painting, tiling, as well as for strengthening old, partially loosened and flaking putty, paint. Contains no solvents, which makes it almost odorless, and can be used even in areas intended for food storage. Dilutable with water.
Ingredients: Acrylic dispersion, water, preservatives and additives.
Usage: The base must be solid, dry, free from oil traces. It is necessary to clean the surface of old, unstable areas, remnants of wallpaper, oil-based paints, etc. as much as possible. Mix well before use. When using on relatively dusty surfaces, it is allowed to dilute with water, no more than 10-15% of the volume of the primer, in other cases it is applied without diluting with water. It is recommended to coat the most absorbent surface with two layers. The work is carried out with a brush, paint roller or by spraying. Drying - in 2-3 hours. Work should be carried out at a temperature not lower than +5ºC and air humidity not higher than 75%. After work, wash the tools with water. Dispose of used containers in accordance with the established procedure.
Drying time - 24 hours at a temperature of 20±2°C and a relative air humidity of 65±5%. At low temperatures and high air humidity, the drying time increases.
Working temperature: +5 to +35 ºС
Coverage: 80-120 mg/m²
Designed for pre-treatment and dedusting of gypsum, cement-based surfaces, putty, porous mineral surfaces (gypsum board, brick, concrete), natural stones, wood, plaster and other surfaces. Ideal for wallpapering, painting, tiling, as well as for strengthening old, partially loosened and flaking putty, paint. Contains no solvents, which makes it almost odorless, and can be used even in areas intended for food storage. Dilutable with water.
Ingredients: Acrylic dispersion, water, preservatives and additives.
Usage: The base must be solid, dry, free from oil traces. It is necessary to clean the surface of old, unstable areas, remnants of wallpaper, oil-based paints, etc. as much as possible. Mix well before use. When using on relatively dusty surfaces, it is allowed to dilute with water, no more than 10-15% of the volume of the primer, in other cases it is applied without diluting with water. It is recommended to coat the most absorbent surface with two layers. The work is carried out with a brush, paint roller or by spraying. Drying - in 2-3 hours. Work should be carried out at a temperature not lower than +5ºC and air humidity not higher than 75%. After work, wash the tools with water. Dispose of used containers in accordance with the established procedure.
Drying time - 24 hours at a temperature of 20±2°C and a relative air humidity of 65±5%. At low temperatures and high air humidity, the drying time increases.
Working temperature: +5 to +35 ºС
Coverage: 80-120 mg/m²
