Waterproofing latex paint for painting swimming pools.
It is elastic, has high elasticity. It is used for plaster, concrete, brickwork, concrete slabs and other exterior works. It has the property of long-term preservation of the original color. Replaces the use of ceramic tiles in bathrooms and swimming pools. Provides water resistance and reliable waterproofing. Resistant to disinfectants and household detergents, chlorine. Does not change color when heated and does not emit odor. Forms a non-slip surface. It is environmentally friendly and safe for health. Does not lose its original appearance over time. Has high hiding power.
Purpose: Intended for protective and decorative painting of surfaces of swimming pools, decorative fountains, landscape sculptures made of reinforced concrete, which are exposed to prolonged exposure to water. It can also be used on horizontal surfaces where there is water accumulation.
Ingredients: Acrylic latex, silicone additives, pigments, antiseptic additives, water.
Coating: Matt and white.
Usage: The surface to be painted must be flat, solid, dry, clean, free from damp and oily areas. It is necessary to remove dust resulting from grinding, brittle and unstable layers, level cracks and crevices with putty, and treat with liquid primer. The concrete base to be painted must not be fresh (e.g., a 10 cm thick layer of coating must dry for at least 28 days). To get rid of salts and alkalis, concrete pools must be filled with water for several days, then dried thoroughly. Possible biological contamination, mold must be cleaned using special materials. Painting should be carried out only after the surfaces have completely dried. The paint is ready for use. Before use, mix the paint well and dilute it with water to a maximum of 5% of the total volume. The amount of water added largely depends on the method of application, type and condition of the surface. The work can be done with a brush, paint roller and sprayer, in 2-3 layers, as required. Painting should be carried out at a temperature not lower than +5°C and air humidity not higher than 80%. After work, wash the tools with water. Dispose of used containers in accordance with the established procedure.
Drying time: 1 hour.
Maintenance: 120-160g/m².
It is elastic, has high elasticity. It is used for plaster, concrete, brickwork, concrete slabs and other exterior works. It has the property of long-term preservation of the original color. Replaces the use of ceramic tiles in bathrooms and swimming pools. Provides water resistance and reliable waterproofing. Resistant to disinfectants and household detergents, chlorine. Does not change color when heated and does not emit odor. Forms a non-slip surface. It is environmentally friendly and safe for health. Does not lose its original appearance over time. Has high hiding power.
Purpose: Intended for protective and decorative painting of surfaces of swimming pools, decorative fountains, landscape sculptures made of reinforced concrete, which are exposed to prolonged exposure to water. It can also be used on horizontal surfaces where there is water accumulation.
Ingredients: Acrylic latex, silicone additives, pigments, antiseptic additives, water.
Coating: Matt and white.
Usage: The surface to be painted must be flat, solid, dry, clean, free from damp and oily areas. It is necessary to remove dust resulting from grinding, brittle and unstable layers, level cracks and crevices with putty, and treat with liquid primer. The concrete base to be painted must not be fresh (e.g., a 10 cm thick layer of coating must dry for at least 28 days). To get rid of salts and alkalis, concrete pools must be filled with water for several days, then dried thoroughly. Possible biological contamination, mold must be cleaned using special materials. Painting should be carried out only after the surfaces have completely dried. The paint is ready for use. Before use, mix the paint well and dilute it with water to a maximum of 5% of the total volume. The amount of water added largely depends on the method of application, type and condition of the surface. The work can be done with a brush, paint roller and sprayer, in 2-3 layers, as required. Painting should be carried out at a temperature not lower than +5°C and air humidity not higher than 80%. After work, wash the tools with water. Dispose of used containers in accordance with the established procedure.
Drying time: 1 hour.
Maintenance: 120-160g/m².
