Semi-gloss latex paint for interior and exterior finishing works.
Does not impede air exchange. Has high coverage, long-term preservation of the original color. Does not lose its original appearance over time, does not turn yellow. Environmentally friendly and safe.
Purpose: For painting interior (concrete, gypsum, putty, wood, wallpaper) and exterior surfaces of buildings (plaster, concrete, brickwork, concrete slab), especially for painting surfaces that require more intensive washing and have a high rate of operation.
Ingredients: Acrylic copolymer and inorganic fillers.
Coating: Matt and white.
Usage: The surface to be painted must be smooth, solid, dry, clean, free of damp and oily areas. It is necessary to remove the dust resulting from sanding in advance, level the brittle and unstable layers, cracks and recesses with putty. Highly absorbent surfaces must first be treated with a liquid primer. Stir the paint well before use. If necessary, 10% of the paint mass can be added to the water. The amount of water added largely depends on the method of application and the type of surface. The work can be done with a brush, paint roller and sprayer, as required, in 1-2 layers. Painting work should be carried out at a temperature not lower than +5°C and air humidity not exceeding 80%. After work, wash the tools with water.
Drying time: 1 hour.
Washability level: 1.
Maintenance: 130-160g/m².
Does not impede air exchange. Has high coverage, long-term preservation of the original color. Does not lose its original appearance over time, does not turn yellow. Environmentally friendly and safe.
Purpose: For painting interior (concrete, gypsum, putty, wood, wallpaper) and exterior surfaces of buildings (plaster, concrete, brickwork, concrete slab), especially for painting surfaces that require more intensive washing and have a high rate of operation.
Ingredients: Acrylic copolymer and inorganic fillers.
Coating: Matt and white.
Usage: The surface to be painted must be smooth, solid, dry, clean, free of damp and oily areas. It is necessary to remove the dust resulting from sanding in advance, level the brittle and unstable layers, cracks and recesses with putty. Highly absorbent surfaces must first be treated with a liquid primer. Stir the paint well before use. If necessary, 10% of the paint mass can be added to the water. The amount of water added largely depends on the method of application and the type of surface. The work can be done with a brush, paint roller and sprayer, as required, in 1-2 layers. Painting work should be carried out at a temperature not lower than +5°C and air humidity not exceeding 80%. After work, wash the tools with water.
Drying time: 1 hour.
Washability level: 1.
Maintenance: 130-160g/m².
