Tile adhesive for interior and exterior use.
Designed for laying terracotta, ceramic and mosaic tiles on walls, concrete floors, brick, plaster in bathrooms, kitchens, toilets and other rooms. Designed for gluing tiles (ceramic tiles, natural and artificial stones) on internal and external coatings of buildings (gypsum, plasterboard, plaster and strong, non-deformable surfaces).
Ingredients: Portland cement, silicate sand and modifier, polymer adhesive, cellulose additives.
Usage: The surface must be dry and strong, previously thoroughly cleaned of paint, oil and dust. The base must be treated with a liquid primer (acrylate). The working surface should be slightly moistened (except for gypsum plasterboard bases). Less load-bearing or weakly absorbent surfaces, such as smooth concrete or waterproof gypsum plasterboard, are recommended to be pre-coated with Beton-Kontakt granular primer to ensure better adhesion to the adhesive and a more favorable surface. Start gluing work at least 4-5 hours after surface preparation.
Drying time: 72 hours.
Water consumption: 5.5-7l = 25 kg.
Consumption: 6-7kg/1m².
Thickness of the applied layer: from 4mm to 8mm.
Designed for laying terracotta, ceramic and mosaic tiles on walls, concrete floors, brick, plaster in bathrooms, kitchens, toilets and other rooms. Designed for gluing tiles (ceramic tiles, natural and artificial stones) on internal and external coatings of buildings (gypsum, plasterboard, plaster and strong, non-deformable surfaces).
Ingredients: Portland cement, silicate sand and modifier, polymer adhesive, cellulose additives.
Usage: The surface must be dry and strong, previously thoroughly cleaned of paint, oil and dust. The base must be treated with a liquid primer (acrylate). The working surface should be slightly moistened (except for gypsum plasterboard bases). Less load-bearing or weakly absorbent surfaces, such as smooth concrete or waterproof gypsum plasterboard, are recommended to be pre-coated with Beton-Kontakt granular primer to ensure better adhesion to the adhesive and a more favorable surface. Start gluing work at least 4-5 hours after surface preparation.
Drying time: 72 hours.
Water consumption: 5.5-7l = 25 kg.
Consumption: 6-7kg/1m².
Thickness of the applied layer: from 4mm to 8mm.
