Tile adhesive with high adhesion and elasticity, for interior and exterior use.
Designed for gluing tiles (ceramic tiles, natural and artificial stones) to interior and exterior building coatings (gypsum, drywall, plaster and strong, non-deformable surfaces). Applicable for gluing heated floors and large ceramic granite slabs.
Ingredients: Portland cement, silicate sand and modifier, polymer adhesive, cellulose additives.
Usage: The surface must be dry and strong, thoroughly cleaned of paint, oil and dust. The base must be treated with a liquid primer (acrylate). The working surface must be slightly moistened (except for gypsum board bases). It is recommended to pre-coat surfaces with less load-bearing capacity or low absorption, such as smooth concrete or waterproof plasterboard, with Beton-Kontakt granular primer to ensure better adhesion to the adhesive and a more favorable surface. Start gluing at least 4-5 hours after surface preparation.
Drying time: 72 hours.
Consumption: 6-7 kg/1 m².
Designed for gluing tiles (ceramic tiles, natural and artificial stones) to interior and exterior building coatings (gypsum, drywall, plaster and strong, non-deformable surfaces). Applicable for gluing heated floors and large ceramic granite slabs.
Ingredients: Portland cement, silicate sand and modifier, polymer adhesive, cellulose additives.
Usage: The surface must be dry and strong, thoroughly cleaned of paint, oil and dust. The base must be treated with a liquid primer (acrylate). The working surface must be slightly moistened (except for gypsum board bases). It is recommended to pre-coat surfaces with less load-bearing capacity or low absorption, such as smooth concrete or waterproof plasterboard, with Beton-Kontakt granular primer to ensure better adhesion to the adhesive and a more favorable surface. Start gluing at least 4-5 hours after surface preparation.
Drying time: 72 hours.
Consumption: 6-7 kg/1 m².
