Latex paint for interior decoration.
EURO series weather-resistant light-resistant paints are not elastic, do not impede air exchange. They are endowed with the property of long-term preservation of the original color. They are environmentally friendly and safe. They do not lose their original appearance over time
Purpose: Designed for finishing internal (garage, basement, hallway, kitchen, bathroom, etc.) and external surfaces (plaster, concrete, brickwork, concrete slab, etc.) of buildings.
Ingredients: Acrylic copolymer and inorganic fillers.
Coating: Matt and white.
Usage: The surface to be painted must be smooth, solid, dry, clean, free from damp and oily areas. It is necessary to remove the dust resulting from sanding in advance, level the brittle and unstable layers, cracks and recesses with putty. Highly absorbent surfaces must first be treated with a liquid primer. Stir the paint well before use. If necessary, 10% of the paint mass can be added to the water. The amount of water added largely depends on the method of application and the type of surface. The work can be done with a brush, paint roller and sprayer, as required, in 1-2 layers. Painting work should be carried out at a temperature not lower than +5°C and air humidity not exceeding 80%. After work, wash the tools with water.
Drying time: 1 hour.
Washability level: 2.
Maintenance: 130-160g/m².
EURO series weather-resistant light-resistant paints are not elastic, do not impede air exchange. They are endowed with the property of long-term preservation of the original color. They are environmentally friendly and safe. They do not lose their original appearance over time
Purpose: Designed for finishing internal (garage, basement, hallway, kitchen, bathroom, etc.) and external surfaces (plaster, concrete, brickwork, concrete slab, etc.) of buildings.
Ingredients: Acrylic copolymer and inorganic fillers.
Coating: Matt and white.
Usage: The surface to be painted must be smooth, solid, dry, clean, free from damp and oily areas. It is necessary to remove the dust resulting from sanding in advance, level the brittle and unstable layers, cracks and recesses with putty. Highly absorbent surfaces must first be treated with a liquid primer. Stir the paint well before use. If necessary, 10% of the paint mass can be added to the water. The amount of water added largely depends on the method of application and the type of surface. The work can be done with a brush, paint roller and sprayer, as required, in 1-2 layers. Painting work should be carried out at a temperature not lower than +5°C and air humidity not exceeding 80%. After work, wash the tools with water.
Drying time: 1 hour.
Washability level: 2.
Maintenance: 130-160g/m².
