Granular acrylic primer for increasing the bearing capacity of the base and bonding subsequent layers.
Coating type: Rough, spiky.
Ingredients: Acrylic dispersion, quartz fraction, water, thickener, modifiers, preservatives and additives.
Surface preparation: The surface must be dry, clean of dirt and old, unstable coatings. It is not allowed to use on frozen bases. Before use and throughout the work, it is necessary to mix the material well, often, to exclude the formation of quartz fraction sediment.
Application: Apply a thin layer with a brush or roller. Work in a ventilated area, wearing rubber gloves. At room temperature and average air humidity, it dries within 2-4 hours. Complete drying is not less than 24 hours. It is not recommended to use in conditions of high humidity and temperatures below +5°С. In case of lowering the temperature and increasing the humidity, the drying time increases. Apply the next layers only after complete drying.
Drying time: 2-4 hours at a temperature of 20±2 ºС and a relative humidity of 70%.
Working temperature: from +5 to +35 ºС
Coverage: 250-500g/m² depending on the absorption-absorption properties of the surface.
Coating type: Rough, spiky.
Ingredients: Acrylic dispersion, quartz fraction, water, thickener, modifiers, preservatives and additives.
Surface preparation: The surface must be dry, clean of dirt and old, unstable coatings. It is not allowed to use on frozen bases. Before use and throughout the work, it is necessary to mix the material well, often, to exclude the formation of quartz fraction sediment.
Application: Apply a thin layer with a brush or roller. Work in a ventilated area, wearing rubber gloves. At room temperature and average air humidity, it dries within 2-4 hours. Complete drying is not less than 24 hours. It is not recommended to use in conditions of high humidity and temperatures below +5°С. In case of lowering the temperature and increasing the humidity, the drying time increases. Apply the next layers only after complete drying.
Drying time: 2-4 hours at a temperature of 20±2 ºС and a relative humidity of 70%.
Working temperature: from +5 to +35 ºС
Coverage: 250-500g/m² depending on the absorption-absorption properties of the surface.
