Universal putty based on a chalk mixture, intended for processing and leveling walls, ceilings and wooden parts. Most suitable for final leveling of relatively small surfaces of walls and ceilings, filling small gaps, cracks, and processing. Due to the chalk base, it is quite easy to sand, providing an ideally smooth surface. It is a ready-to-use mixture, does not require additional additives and solvents. Ideal for woodworking, finishing/processing doors, windows and other similar wooden surfaces.
Safety rules: Carry out work with protective gloves. Avoid prolonged contact with the skin as much as possible. In case of contact with eyes, rinse with clean water, if necessary, consult a doctor. Keep out of the reach of children.
Ingredients: The putty consists of a mixture of chalk, calcium carbonate and cellulose additives, a small amount of water, with the addition of light fillers and additives.
Surface preparation: The working surface must be dry, clean of dirt and old, unstable elements. Thoroughly clean loose and old surfaces, treat highly absorbent or chalky surfaces with a deep penetrating primer. Widen relatively deep cracks, fill them separately in advance, before the main layer, let them dry, then treat with an additional layer.
Application: Mix the putty before use, apply to the surface with a stainless steel or rubber spatula. At room temperature and average air humidity, it dries within 1-3 hours, depending on the layer thickness. Complete drying is not less than 24 hours.
Drying time: 48 hours at 70% relative humidity and +20°C for a layer thickness of 0.5 cm.
Working temperature: +5 to +35 ºС
Coverage: Depends on the thickness of the layer, the size and depth of the cracks and holes being treated.
Safety rules: Carry out work with protective gloves. Avoid prolonged contact with the skin as much as possible. In case of contact with eyes, rinse with clean water, if necessary, consult a doctor. Keep out of the reach of children.
Ingredients: The putty consists of a mixture of chalk, calcium carbonate and cellulose additives, a small amount of water, with the addition of light fillers and additives.
Surface preparation: The working surface must be dry, clean of dirt and old, unstable elements. Thoroughly clean loose and old surfaces, treat highly absorbent or chalky surfaces with a deep penetrating primer. Widen relatively deep cracks, fill them separately in advance, before the main layer, let them dry, then treat with an additional layer.
Application: Mix the putty before use, apply to the surface with a stainless steel or rubber spatula. At room temperature and average air humidity, it dries within 1-3 hours, depending on the layer thickness. Complete drying is not less than 24 hours.
Drying time: 48 hours at 70% relative humidity and +20°C for a layer thickness of 0.5 cm.
Working temperature: +5 to +35 ºС
Coverage: Depends on the thickness of the layer, the size and depth of the cracks and holes being treated.
