Acrylic-based decorative varnish is designed to protect and decorate wood, brick, concrete and other materials from external influences, to give a rich decorative effect. It is also intended for coating water-based paints. Provides long-term protection against rot, blueing, mold, fungi, wood insects. Forms a resistant semi-gloss coating that has water-resistant, moisture-resistant properties. Significantly increases the shelf life of wood. Do not use when processing wet wood. To obtain shades of valuable wood species, paint with special paints. Preserves and emphasizes the structure of wood. Suitable for painting by hand and with a paint machine. Not intended for floor varnishing, used for decorative finishing of surfaces with medium load and protection from external influences. Environmentally friendly and safe for health.
Ingredients: Water, acrylic latex and additives, special plasticizers providing elasticity.
Usage: Mix the varnish thoroughly before use. If necessary, dilute the varnish with water (no more than 10%). Mixing with other compounds (solvents, etc.) is not allowed. Clean the surface to be treated from dirt, dust, sand and other mechanical contamination. To improve the quality of the surface to be treated, prime the surface with a primer or primer-varnish (1 l. water to 1 l. varnish ratio) before applying the varnish. Apply with a brush, roller on a dry and clean surface in 1-2 layers with an interval of 45-60 minutes at a temperature not lower than +10C. To obtain an even coloring of the surface in the required color, it is recommended to apply the tint solution in only one layer. Subsequent coatings/layers should be colorless. When applying the solution to natural wood, it is necessary to take into account that the resulting shade depends on the type of tree, its strength and the initial color of the wood, as well as the number of painted layers. When applying the gunerang varnish, it is necessary to carry out a test painting to check the shade. The final shade is formed only after complete drying.
Drying time: 2-4 hours at a temperature of 20±2 ºС and a relative humidity of 70%.
Working temperature: +5 to +35 ºС
Coverage: 80-120g/m², depending on the absorption-absorption properties of the surface and the type of natural wood.
Ingredients: Water, acrylic latex and additives, special plasticizers providing elasticity.
Usage: Mix the varnish thoroughly before use. If necessary, dilute the varnish with water (no more than 10%). Mixing with other compounds (solvents, etc.) is not allowed. Clean the surface to be treated from dirt, dust, sand and other mechanical contamination. To improve the quality of the surface to be treated, prime the surface with a primer or primer-varnish (1 l. water to 1 l. varnish ratio) before applying the varnish. Apply with a brush, roller on a dry and clean surface in 1-2 layers with an interval of 45-60 minutes at a temperature not lower than +10C. To obtain an even coloring of the surface in the required color, it is recommended to apply the tint solution in only one layer. Subsequent coatings/layers should be colorless. When applying the solution to natural wood, it is necessary to take into account that the resulting shade depends on the type of tree, its strength and the initial color of the wood, as well as the number of painted layers. When applying the gunerang varnish, it is necessary to carry out a test painting to check the shade. The final shade is formed only after complete drying.
Drying time: 2-4 hours at a temperature of 20±2 ºС and a relative humidity of 70%.
Working temperature: +5 to +35 ºС
Coverage: 80-120g/m², depending on the absorption-absorption properties of the surface and the type of natural wood.
