Tile adhesive for interior work.
Designed for laying terracotta, ceramic and mosaic tiles on walls, concrete floors, brick, plaster in bathrooms, kitchens, toilets and other rooms.
Ingredients: Portland cement, silicate sand and modifier, polymer adhesive, cellulose additives.
Usage: The surface must be dry and strong, thoroughly cleaned of paint, oil and dust. The base must be treated with a liquid primer (acrylate). The working surface must be slightly moistened (except for gypsum board bases). It is recommended to pre-coat surfaces with less load-bearing capacity or low absorption, such as smooth concrete or waterproof plasterboard, with Beton-Kontakt granular primer to ensure better adhesion to the adhesive and a more favorable surface. Start gluing at least 4-5 hours after surface preparation.
Drying time: 72 hours.
Water consumption: 5.5-7 l = 25 kg.
Thickness of the applied layer: from 4 mm to 8 mm.
Designed for laying terracotta, ceramic and mosaic tiles on walls, concrete floors, brick, plaster in bathrooms, kitchens, toilets and other rooms.
Ingredients: Portland cement, silicate sand and modifier, polymer adhesive, cellulose additives.
Usage: The surface must be dry and strong, thoroughly cleaned of paint, oil and dust. The base must be treated with a liquid primer (acrylate). The working surface must be slightly moistened (except for gypsum board bases). It is recommended to pre-coat surfaces with less load-bearing capacity or low absorption, such as smooth concrete or waterproof plasterboard, with Beton-Kontakt granular primer to ensure better adhesion to the adhesive and a more favorable surface. Start gluing at least 4-5 hours after surface preparation.
Drying time: 72 hours.
Water consumption: 5.5-7 l = 25 kg.
Thickness of the applied layer: from 4 mm to 8 mm.
